Grease transfer kit
Description
The ideal solution for quickly and cleanly transferring lubricating greases by fishing directly from commercial 180 kg drums.
A high-performance pneumatic pump allows rapid delivery of grease to fill cartridges, cans, buckets or directly into mechanical equipment that requires it.
A heavy steel disc, equipped with a lip seal on the outer edge and an O-ring on the central hub, compresses the grease avoiding the formation of air pockets and ensuring the suction of the entire contents of the drum which would otherwise remain attached to the walls of the same.
Art. 4700 - GREASE TRANSFER KIT
Description:
A pneumatic high performance pump recommended for low and medium viscosity filling of grease for single application, where is
requested an high volume delivery. The heavy follower plate prevents the formation of air pockets and assure the suction of all grease
from the drum.
Article consisting of:
- Air-operated grease pump ratio 6:1 for 200 kg drums,
- Air lubricator and pressure regulator,
- Drum cover diam. 600 mm,
- Follower plate for drums internal diameter 570 mm
| Compression ratio | R = 6 : 1 |
|---|---|
Pressure use |
6 – 8 bar |
Flow rate (with grease NLGI 2 at 15°C) |
4 Kg / min |
Air consumption at 6 bar |
100 l/min |
Air input attack |
1/4” |
Grease output attack |
3/4” |
Use for drums |
180 kg |
Accessory items:
Art. 593710 - Grease gun for high flow
