Tank for waste oil

Description

TANK with cylindrical horizontal axle, fitted on anti-roll support brackets. Manufactured with top quality carbon steel S 235 JR UNI EN 10025, submerged arc welded. Painted with epoxy powders, hydraulically tested and equipped of the following accessories: manhole diameter 420 mm with bolt and seals, hatch locking, load compartment/ unloading oil filters with grill, 1”-1/2 pressure relief valve with flame-breaker mesh.
Externally visible level gauge with inner protection hose for the float, drain sleeve with ball valve on the bottom by 3/4“ and security cap, eyebolts.

CONTAINMENT BASIN made of carbon steel sheet, self-supporting base frame already preset and bolted to the bottom of the tank, it can be placed on any type of ground, with a capacity of not less than 100% of the overall geometric capacity. Equipped with safety cap 1” suitable for fixing the uprights of the roofing. The basin is entirely painted with epoxy powder.

TECHNICAL FEATURES

Description:

Used oil tank complete with containment basin made of carbon steel sheet, totally painted with epoxy powders.

Art.

Capacity (litres)

Dimensions (without roof) (WxDxH mm)

SE100010001200x2000x1500
SE150015001500x2450x1500
SE230023001500x2450x1650

Chamber of drain used filters

Level indicator

VARIANTS

Art. 545010
Kit Self loading pump

Art. 545020
Kit self loading pump with basin wheeled oil drain
Basin wheeled oil drain capacity: 70 litres
Tank Dimensions: 800x560x180 mm

SIMILAR AND / OR RELATED ITEMS

REQUEST INFORMATION ON THESE ITEMS